混气电解加工中两相流音速及阻塞机理研究

着重分析研究气液两相流音速特性及其阻塞机理。通过测量由小药量电雷管爆炸而产生的压力波传播速度，然后修正到音速。试验结果表明，气液两相流音速与气泡率、当地压力及其流型有关。由于气液混合物强烈的压缩性，混气电解加工间隙中易于出现类似可压缩气体的阻塞现象。     

离心泵叶轮内含颗粒的幂律流体的密相两相湍流研究

阐述了幂律流体控制方程的特点，首先对单相的幂律流体与密相液固两相流进行了计算，计算结果与实验数据吻合较好。其次对泵离心叶轮内的含颗粒的幂律流体的两相流动进行了计算，从进口到出口，幂律流体的速度是减小的，压力随半径增大逐渐升高，而且压力面上的压力大于吸力面上的压力。吸力面上的颗粒拟温度小于压力面上的颗粒拟温度，而且靠近壁面处的大于叶道中的。最后比较了液固两相流与含颗粒的幂律流体的两相流的流动。流体相的紊动能有一定的差别，而且颗粒拟温度也有较大差别。     

电子移相方法的讨论

对精密测试中常用的几种移相方法进行了讨论,主要浅析小角度电路移相方法。     

三维管道超声速气固两相流动的CFD/DSMC仿真

采用NND格式求解气相N-S方程，采用DSMC方法模拟固相颗粒运动，数值模拟了三维管道超声速气固两相流场，分析了固体颗粒对流场结构产生的影响。计算结果表明，将DSMC方法与CFD方法相结合是解决气固两相流动问题的一种有效途径。     

高频振荡器噪声分析

 本文将高频振荡器视为具有深度正反馈噪声放大器。对它分析,给出正弦波信号的谱、等效带宽及相位噪声谱;同时还提出诸如高频振荡器内部产生的随机游走噪声形成机理等新看法。     

Phase Space Density Analysis of Energy Transport in the Earth’s Magnetotail

Two energetic events in the Earth’s magnetotail detected by Geotail are examined with detailed analysis of three-dimensional velocity phase space density. It is found that the occurrence of multiple ion components is high during these dynamic episodes. Different populations evolve independently of each other, suggesting particles from multiple activity sites contributing to the observed phase space density. The transport properties with consideration of multiple components are evaluated, with the result showing significant differences from those based on a single fluid approach. This comparison indicates that precise evaluation of the energy and magnetic flux transport of energetic events in the magnetotail requires resolving individual populations in the phase space density.     

高过载条件下绝热层烧蚀实验方法研究 (Ⅰ)方案论证及数值模拟

分析了高过载对固体火箭发动机流场和绝热层烧蚀的影响规律，提出一种新的研究思路：采用数值模拟方法来预示发动机三维两相流场，建立高过载流场模拟实验装置，开展绝热层烧蚀实验，建立高过载条件下的绝热层烧蚀模型，在此基础上发展高过载发动机绝热层设计和烧蚀预示方法。其中关键技术是高过载流场的模拟，对粒子加入法和弯管分离法两种方案进行了论证，认为弯管分离法原理上是可行的。为了验证这种方案的可行性，开展了弯管通道两相流的数值模拟研究，计算结果表明弯管装置具有使凝相粒子聚集形成高浓度粒子流的功能。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

压控振荡器品质因数与其相位噪声的关系

讨论了压控振荡器的相位噪声与其品质因数的关系,某实际压控振荡器的相噪测试结果验证了经理论推导的相位噪声谱的正确性。     

导弹机动飞行的弹道参数估算

为简化计算,根据导弹的质心运动方程,通过近似处理导出了导弹机动飞行中助推段、跨越段和机动段弹道参数的估算公式。仿真计算表明,该估算公式的计算结果与理论公式的偏差较小,且方法简便,可用于导弹机动飞行的弹道设计。